RAB65 Carbon Airbox
Part Number: RAB65
The RAB65 was developed for kits in the late 1990s and has been used in may others since. Not the cheapest solution but if you want the ultimate in looks and performance then it can't be beaten.
Our JC60FC range of filters will fit straight into these air boxes.
Measurements
A - (Length) Measurement taken from airbox inlet (C), to filter spinning outlet (D). Rebated ARAB Spinning reduces length by approx. 20mm
B - (Width) Measurement taken at widest point of filter lid spinning.
Do not measure from screw to screw.
C - Inlet (Dirty air in) measurement taken as internal diameter.
See table for duct sizing guide.
D - Outlet (Clean air out)
All dimensions are in (mm)
| Part No. | A (Length) | B (Width) | C (Inlet) | D (Outlet ID / OD) | BHP |
|---|---|---|---|---|---|
| RAB65 w/ JC60/58FC | 354 | 163 | 99 | 58 / 61 | 200 |
| RAB65 w/ JC60/60FC | 373 | 163 | 99 | 60 / 63 | 220 |
| RAB65 w/ JC60/63FC | 373 | 163 | 99 | 63 / 66 | 240 |
| RAB65 w/ JC60/67FC | 375 | 163 | 99 | 67 / 70 | 270 |
| RAB65 w/ JC60/70FC | 375 | 163 | 99 | 70 / 73 | 290 |
| RAB65 w/ JC60/73FC | 371 | 163 | 99 | 73 / 76 | 300 |
| RAB65 w/ JC60/78FC | 365 | 163 | 99 | 78 / 81 | 310 |
| RAB65 w/ JC60/84FC | 367 | 163 | 99 | 84 / 87 | 330 |
View All Products
Our Products
Get in touch
With the team
